Tue Dec 01, 2015 5:40 am
Tue Dec 01, 2015 7:52 am
Tue Dec 01, 2015 8:06 am
Ches wrote:My son has a Tribute Fallout, and it ROCKS! Kind of makes me want to get a USA version, but I see on the G&L website that neck options are not available. Bummer! Any idea why?
Tue Dec 01, 2015 11:55 am
Tue Dec 01, 2015 12:11 pm
Sat Dec 05, 2015 12:24 pm
Sat Dec 05, 2015 3:56 pm
Yamwich wrote:My USA Fallout must be a one-of-a-kind, then. I was able to order it with a different neck, I am pretty sure it was the 1B option, a slimmer profile.
Mon Aug 08, 2016 7:15 pm
Tue Aug 09, 2016 8:05 pm
lefty_major wrote:Hi Craig,
It's been many months since this topic was discussed. Anything new at G&L about opening up neck options for the Fallout? I'm getting one when they do!
Thanks!
Hi Dave,
A few of members are again inquiring to get news about neck options for the Fallout, SC-2 and F-100.
Are these still in the CAD/CAM project queue?
Thanks,
--Craig
No news on that, Craig.
Wed Aug 10, 2016 5:43 am
Tue Jan 23, 2018 8:02 am
Neck profile: Slim C (neck profile options must be 1 5/8” nut width only)
Classic C - This is the profile most G&L fans associate with the post 2000 era. 1 5/8” nut width, slight edge roll, medium taper from 0.830” to 0.960”.
It starts off fairly slim and gets beefier up the neck. These specs were part of the #1 neck.
Heritage ‘86 - Faithful to the early G&L years with a 1 5/8” nut width, slight edge roll, and medium taper from 0.790” at 1st fret to a 0.910” at 12th fret.
These specs were part of the #1b neck.
Modern U - Fans of Leo’s early U-shape necks often want a chunk down low but not too much at the top.
While some of those early U-shape necks were extremely thick, the Modern U offers a bit more chunk but not too much.
1 5/8” nut width, slight edge roll, mild taper from 0.850” at the 1st fret to 0.910” at the 12th fret. These specs were part of the #1c neck.
Soft V - A gentle V-shape is heaven for some players, and this is one will delight. Mild V-shape down low which fades to almost C-shape up top.
1 5/8” nut width, slight edge roll, mild taper from 0.830” at the 1st fret to 0.960” at the 12th fret. These specs were part of the #2a neck.
Deep V - A more aggressive V-shape for those who can’t get enough V. Pronounced V-shape down low which fades to moderate V-shape up top.
1 5/8” nut width, slight edge roll, mild taper from 0.890” at the 1st fret to 0.930” at the 12th fret. These specs were part of the #1d neck.