DF bridge bending range

Wed Sep 29, 2010 1:50 pm

Hi,
I'd like to know how many semitones can be bent up and down with the tremolo arm, provided that the DF bridge has a proper setup. Should it be the same for all the strings ? :confused0007: (The guitar is a S-500 Tribute)
Thanks !

Re: DF bridge bending range

Mon Nov 29, 2010 10:28 am

panchito wrote:Hi,
I'd like to know how many semitones can be bent up and down with the tremolo arm, provided that the DF bridge has a proper setup. Should it be the same for all the strings ? :confused0007: (The guitar is a S-500 Tribute)
Thanks !


I contacted Steve Grom at G&L with your question.
Here is his reply:

When a guitar leaves the G&L Factory in Fullerton, CA the Dual Fulcrum Vibrato is setup to be “floating” (meaning you can raise and lower the pitch of the strings). You will find with the average setup, using .010 to .046 gauge strings, the range of pitch bend upwards is a ½ step (C to C#) and the downwards range to be about a full step (G to F).

The upward range is going to stay about the same from string to string, but the downward range increase as the strings get larger due to the reduced tension on the larger diameter strings.

I hope this information is helpful

Steve Grom

Re: DF bridge bending range

Mon Nov 29, 2010 10:47 am

Hi Craig,

thanks a lot, to you and to Steve, that perfectly answers my question. :happy0065:
It is always nice to learn something here !