In case you have not seen these posts, please do...
 G&L
What's all this about?
			
			
									
						
							FYI: G&L ...
- 
				Craig
														 - Site Admin
 - Posts: 11740
 - Joined: Tue Mar 03, 2009 10:52 am
 - Location: Either Coto De Caza, CA or Paso Robles, CA
 
FYI: G&L ...
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
			
						Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
- 
				Craig
														 - Site Admin
 - Posts: 11740
 - Joined: Tue Mar 03, 2009 10:52 am
 - Location: Either Coto De Caza, CA or Paso Robles, CA
 
Re: FYI: G&L ...
This morning my wife, Linda, sent me a link to an article on the Orange County Register, titled: Leo Fender’s last OC company shuts down.
Here is the link [which will open in a new tab]:
OC company shuts down
While this is not an official announcement, it does seem to confirm many of the things that have been recently posted on net about the closing of G&L in Fullerton, CA.
			
			
									
						
							Here is the link [which will open in a new tab]:
OC company shuts down
While this is not an official announcement, it does seem to confirm many of the things that have been recently posted on net about the closing of G&L in Fullerton, CA.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
			
						Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
- 
				Craig
														 - Site Admin
 - Posts: 11740
 - Joined: Tue Mar 03, 2009 10:52 am
 - Location: Either Coto De Caza, CA or Paso Robles, CA
 
Re: FYI: G&L ...
I just found this YouTube video done by Steve Araujo yesterday, so check it out:
			
			
									
						
							--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
			
						Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options